Описание оборудования | |
---|---|
WCS interface module with EtherCAT interface | |
General specifications | |
Installation | DIN rail mounting |
Functional safety related parameters | |
MTTFd | 180 a |
Mission Time (TM) | 10 a |
Diagnostic Coverage (DC) | 0 % |
Electrical specifications | |
Operating voltage | 10 ... 30 V DC |
Power consumption | ? 3.6 W (without read heads) |
Interface 1 | |
Connection of | control system |
Interface type | Ethernet; 100 BASE-TX |
Protocol | EtherCAT |
Transfer rate | 100 MBit/s |
Data output format | binary code |
Interface 2 | |
Connection of | control system |
Interface type | Ethernet; 100 BASE-TX |
Protocol | EtherCAT |
Transfer rate | 100 MBit/s |
Data output format | binary code |
Interface 3 | |
Connection of | Read head |
Connectable read heads | WCS...-LS121 , WCS...-LS221 |
Interface type | RS-485 |
Protocol | half duplex |
Transfer rate | 62.5 kBit/s |
RS485 termination resistor | switchable |
Refresh cycle of read head | 1 ms |
Standard conformity | |
Emitted interference | EN 55011, cl. A: 2007 |
Noise immunity | EN 61000-6-2:2005 |
Approvals and certificates | |
EAC conformity | TRCU 020/2011 |
CCC approval | CCC approval / marking not required for products rated ?36 V |
Ambient conditions | |
Operating temperature | -25 ... 85 °C (-13 ... 185 °F) , no moisture condensation |
Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
Relative humidity | ? 80 % |
Mechanical specifications | |
Connection type | Interface 1 & 2: RJ-45 socket, 8-pin Interface 3: terminal connection ? 2.5 mm2 Interface 4: Terminal connection, 2-pin |
Housing width | 23 mm |
Housing height | 100 mm (without plug-in screw connector) 111 mm (incl. plug-in screw connector) |
Housing depth | 115 mm |
Degree of protection | IP20 |
Material | plastic |
Installation position | any position |
Mass | approx. 130 g |
8 (029) 555-8-000 | |